| Peer-Reviewed

Power Electronics Converter Application in Traction Power Supply System

Received: 22 January 2020     Accepted: 5 March 2020     Published: 25 August 2020
Views:       Downloads:
Abstract

The electrified railway systems have been spreading all over the world. In big cities, metro or light rail transit railway networks have been constructed extensively. Expansion of this enormous dynamic electric load has been created huge amount of stress on the power grid. Generally, the speed drives, power conversion equipment or frequency converters inject harmonic in to railways power supply system. These harmonics seriously disturbs other electrical systems or generate a high frequency electromagnetic fields in neighboring electrical equipment as well as traction network signaling system. However, new developments in power electronic converter enable efficient and flexible conditioning of electrical energy in the application of railway power system. Power electronics, already previously being a pioneer for progress of traction vehicles, brought forth an ultimate standardization of the traction power supply system. Today, the spectrum of power electronic converters application in the traction system spread in many areas including power electronics based traction transformers, auxiliary power supply systems, rectification, integration of regenerative braking, reactive power compensation and voltage regulation and traction motor controls. This paper reviews the applications of semiconductor based power electronic devices in electrified railway system and illustrates some major application areas.

Published in American Journal of Electrical Power and Energy Systems (Volume 9, Issue 4)
DOI 10.11648/j.epes.20200904.12
Page(s) 67-73
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2020. Published by Science Publishing Group

Keywords

Power Electronics, Railway System, Revolution, Traction Transformer

References
[1] H. Meniken: “Stromrichtersystem mit wechsel-spannungs-zwischenkreis und seine anwendung in der traktionstechnik” PhD thesis, Fakultät für Elektrotechnik, RWTH Aachen, Aachen, Germany, 1978.
[2] S. Östlund: “A primary switched converter system for traction applications” PhD thesis, Royal Institute of Technology, KTH, Stockholm, Sweden, 1992.
[3] S. Östlund: “Reduction of transformer rated power and line current harmonics in a primary switched converter system for traction applications”, The 5 th European Conf. on Power Electronics and Applications–EPE, Brighton, UK, 1993, pp. 112-119.
[4] P. C. Kjaer, S. Norrga, S. Östlund: “A primary-switched line-side converter using zero-voltage switching”, IEEE Trans. on Industry Applications, Vol. 37, No. 6, 2001, pp. 1824-1831.
[5] N. Hugo, P. Stefanutti, M. Pellerin, A. Akdag: “Power electronics traction transformer”, The 12 th European Conf. on Electronics and Applications–EPE, Aalborg, Denmark, 2007, CD- ROM paper: 0715.
[6] A.-C. Rufer, N. Schibli, V. Briguet: “A direct coupled 4-quadrant multilevel converter for 16 2/3 Hz traction systems”, The 6th International Conference on Power Electronics and Variable Speed Drives, Nottingham, UK, 1996, pp. 448-453.
[7] A. Rufer, N. Schibli, C. Chabert, C. Zimmermann: “Configurable front- end converters for multicurrent locomotives operated on 16 2/3 Hz AC and 3kV DC systems”, IEEE Trans. on Power Electronics, Vol. 18, No. 5, pp. 2003, 1186-1193.
[8] M. Steiner, H. Reinold: “Medium frequency topology in railway applications”, The 12 th European Conf. on Power Electronics and Applications–EPE, Aalborg, Denmark, 2007, CD-ROM paper: 0585.
[9] H. Iman-Eini, Sh. Fahrangi, J. L. Schanen, M. Khakbazan-Fard: “A modular power electronic transformer based on a cascaded H-bridge multilevel converter”, Electric Power System Research, vol. 79, no. 12, 2009, pp. 1625-1637.
[10] J. Weigel, A. Nagel, H. Hoffmann: “High voltage IGBTs in medium frequency traction power supply”, The 13 th European Conf. on Power Electronics and Applications–EPE, Barcelona, Spain, 2009, CD-ROM paper: 0804.
[11] H. Hoffmann, B. Piepenbreier: “High voltage IGBTs and medium frequency transformer in DC-DC converters for railway applications”, International Symposium on Power Electronics, Electrical Drives, Automation and Motion–SPEEDAM, Pisa, Italy, 2010, pp. 744-749.
[12] B. Engel, M. Victor, G. Bachmann, A. Falk: “15kV/16.7Hz energy supply system with medium frequency transformer and 6.5kV IGBTs in resonant operation”, The 10 th European Conf. on Power Electronics and Applications–EPE, Toulouse, France, 2003, CD-ROM paper: 1192.
[13] J. Taufiq: “Power electronics technologies for railway vehicles”, International Power Conversion Conference–PCC, Nagoya, Japan, 2007, pp. 1388-1393.
[14] M. Mermet-Guyennet: “New power technologies for traction drives”, International Symposium on Power Electronics, Electrical Drives, Automation and Motion–SPEEDAM, Pisa, Italy, 2010, pp. 719-723.
[15] M. Glinka, R. Marquardt: “A new AC/AC-multilevel converter family applied to single-phase converter”, The 5 th International Conf. on Power Electronics and Drive Systems, PEDS, vol. 1, Singapore, 2003, pp. 16-23.
[16] P. G. E. Vos “The Auxiliary Power System for Double Deck Trains” Auxiliary Power Supplies for Rolling Stock IEE 1992.
[17] D. R. Kelsall “Design Considerations for Static Auxiliary Supplies” Power Engineering Journal 1992.
[18] S. Indarida et al. “A Novel Power Control Method Achieving High Reliability of Auxiliary Power Supply System for Trains” EPE 2005.
[19] D. Vinnikovz”Isolated DC/DC Converter Topology with Three-Phase Intermediate AC-Link” Baltic Electronics Conference IEEE 2006.
[20] Li Zhonghao “Chinese Railways and New Scientific Technology” Autonomous Decentralized Systems IEEE 2000.
[21] A. S. Hartono et al. “Development of New Drive system of Diesel Electric Multiple Unit (DEMU) for Indonesia Railway” Autonomous Decentralized Systems IEEE 2001.
[22] A. J. Griffin “Methods of Improving the Voltage Regulation on 25kV Electric Railways” Main Line Railway Electrification 1989.
[23] “High-Speed Trains Worldwide” EJRCF 1994.
[24] R. J. Hill “Electric Railway Traction” Part 1&2 PEJ 1994.
[25] W. Gunselmann “Technology for Increased Energy Efficiency in Railway Systems” EPE 2005.
[26] Pee-Chin Tan et al. “Voltage Form Factor Control and Reactive Power Compensation in a 25kV Electrified Railway System Using a Shunt Active Filter Based on Voltage Detection” IEEE Trans. on industry applications 2003.
[27] Z. S. Mouneimne et al. “Demonstrating the Electromagnetic Compatibility of a Vehicle-borne Static Converter” Developments in Mass Transit Systems IEE 1998.
[28] B Busco et al. “Digital Control and Simulation for Power Electronic Apparatus in dual Voltage Railway Locomotive” Power Electronics IEEE Trans. 2003.
[29] L. A. M. Van Dongen et al. “Energy-Efficient Driving Patterns in Electric railway Traction” Main Line Railway Electrification 1989.
[30] Ph. Cougnon et al. “The Brussels tramway 2000 with Asynchronous Traction” Power Electronics and Applications EPE 1993.
[31] D. P. Urciuoli and C. W. Tipton, “Development of a 90 kW bi-directional dc–dc converter for power dense applications,” in Proc. IEEE APEC, Dallas, TX, Mar. 2006, pp. 1375–1378.
[32] S. J. Kim “Modeling and analysis of spacecraft battery charger systems,” Ph. D. Dissertation, VPI&SU, 1991.
[33] D. M. Sable, “Optimization of space craft battery charger/discharger systems,” Ph. D. Dissertation, VPI&SU, 1991.
[34] F. Caricchi, F. Crescimbini, G. Noia, and D. Pirolo, “Experimental study of a bidirectional dc-dc converter for the dc link voltage control and the regenerative braking in PM motor drives devoted to electrical vehicles,” in Proc. IEEE APEC, Orlando, FL, Feb. 1994, pp. 381–386.
[35] K. Asano, Y. Inaguma, H. Ohtani, E. Sato, M. Okamua, and S. Sasaki, ”High performance motor drive technologies for hybrid vehicles,” in Proc. of PCC, Nogoya, Japan, April 2007, pp. 1584-1589.
[36] S. Aso, M. Kizaki, and Y. Nonobe, “Development of fuel cell hybrid vehicles in Toyota,” in Proc. of PCC, Nogoya, Japan, April 2007, pp. 1606-1611.
[37] X. Huang, T. Nergaard., J.-S. Lai, X. Xu, and L. Zhu, “A DSP based controller for high-power interleaved boost converters,” in Proc. IEEE APEC, Miami, FL, Feb. 2003, pp. 327–333.
[38] J. S. Batchvarov, J. L. Duartek, and M. A. M. Hendrix, “Interleaved converters based on hysteresis current control,” in Proc. IEEE PESC, Galway Ireland, June 2000, pp. 655–661.
[39] O. Garcia, P. Zumel, A. de Castro, and J. A. Cobo, “Automotive dc-dc Bidirectional Converter Made with Many Interleaved Buck Stages,” IEEE Trans. Power Electron., vol. 21, May 2006, pp. 578–586.
[40] Y. Zhang and P. C. Sen, “A New Soft-Switching Technique for Buck, Boost, and Buck-Boost Converters,” IEEE Trans. Ind. Appl., vol. 39, Nov./Dec. 2003, pp. 1775–1781.
[41] K. Wang, C. Lin, L. Zhu, D. Qu, F. Lee, and J. Lai, “Bi-directional DC to DC converters for fuel cell systems,” in Proc. IEEE workshop Power Electronics in Transportation, Dearborn, MI, USA, Oct. 1998, pp. 47–51.
[42] L. Zhu, “A novel soft-commutating isolated boost full-bridge ZVS- PWM DC-DC converter for bi-directional high power applications,” in Proc. IEEE Power Electronics Specialists Conference (PESC’04), Aachen, Germany, Jun. 2004, pp. 2141 2146. BIBLIOGRAPHY 287.
[43] S. Jang, T. Lee, W. Lee, and C. Won, “Bi-directional DC-DC converter for fuel cell generation system,” in Proc. IEEE Power Electronics Specialists Conference (PESC’04), Aachen, Germany, Jun. 2004, pp. 4722–4728.
[44] R. Gopinath, S. Kim, J. H. Hahn, P. N. Enjeti, M. B. Yeary, and J. W. Howze, “Development of a low cost fuel cell inverter system with DSP control,” IEEE Trans. Power Electron., vol. 19, no. 5, pp. 1256–1262, Sep. 2004.
[45] Y. Song and P. Enjeti, “A high frequency link direct DC-AC converter for residential fuel cell power systems,” in Proc. IEEE Power Electronics Specialists Conference (PESC’04), Aachen, Germany, Jun. 2004, pp. 4755–4761.
[46] A. M. Tuckey and J. N. Krase, “A low-cost inverter for domestic fuel cell applications,” in Proc. IEEE Power Electronics Specialists Conference (PESC’02), Cairns, Jun. 2002, pp. 339–346.
[47] Zh. Sun et all “A Novel Active Power Quality Compensator Topology for Electrified Railway” Power Electronics IEEE Trans. 2004.
[48] P. C. Tan et al. “A Robust Multilevel Hybrid Compensation System for 25kV Electrified Railway Application” Power Electronics IEEE T. 2004.
[49] L. Battistelli “Two-phase Controlled Compensator for Alternating Current Quality Improvement of Electrified Railway Systems” Electric Power Applications IEE Trans. 2006.
[50] P. C Tan et al. “Optimal Impedance Termination of 25kV Electrified Railway System for Improved Power Quality” Power Delivery IEEE Trans 2005.
[51] H. Lee et al. “Harmonic Analysis of Korean High-Speed Railway Using the Eight-Port Representation Model” Power Delivery IEEE Trans. 2006.
[52] G. W. Chang et al. “Modeling Characteristics of Harmonic Current Generated by High-Speed Railway Traction Drive Converters” Power Delivery IEEE Trans 2004.
[53] S. H. Lee “Analysis of Catrnary Voltage of an AT-Fed HSR System” Vehicular Technology IEEE Trans. 2004.
[54] T. H. Chen et al. “Criteria Estimate Voltage Unbalance due to High Speed Railway Demands” Power Systems IEE Trans. 1994.
Cite This Article
  • APA Style

    Asegid Belay Kebede, Getachew Biru Worku. (2020). Power Electronics Converter Application in Traction Power Supply System. American Journal of Electrical Power and Energy Systems, 9(4), 67-73. https://doi.org/10.11648/j.epes.20200904.12

    Copy | Download

    ACS Style

    Asegid Belay Kebede; Getachew Biru Worku. Power Electronics Converter Application in Traction Power Supply System. Am. J. Electr. Power Energy Syst. 2020, 9(4), 67-73. doi: 10.11648/j.epes.20200904.12

    Copy | Download

    AMA Style

    Asegid Belay Kebede, Getachew Biru Worku. Power Electronics Converter Application in Traction Power Supply System. Am J Electr Power Energy Syst. 2020;9(4):67-73. doi: 10.11648/j.epes.20200904.12

    Copy | Download

  • @article{10.11648/j.epes.20200904.12,
      author = {Asegid Belay Kebede and Getachew Biru Worku},
      title = {Power Electronics Converter Application in Traction Power Supply System},
      journal = {American Journal of Electrical Power and Energy Systems},
      volume = {9},
      number = {4},
      pages = {67-73},
      doi = {10.11648/j.epes.20200904.12},
      url = {https://doi.org/10.11648/j.epes.20200904.12},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.epes.20200904.12},
      abstract = {The electrified railway systems have been spreading all over the world. In big cities, metro or light rail transit railway networks have been constructed extensively. Expansion of this enormous dynamic electric load has been created huge amount of stress on the power grid. Generally, the speed drives, power conversion equipment or frequency converters inject harmonic in to railways power supply system. These harmonics seriously disturbs other electrical systems or generate a high frequency electromagnetic fields in neighboring electrical equipment as well as traction network signaling system. However, new developments in power electronic converter enable efficient and flexible conditioning of electrical energy in the application of railway power system. Power electronics, already previously being a pioneer for progress of traction vehicles, brought forth an ultimate standardization of the traction power supply system. Today, the spectrum of power electronic converters application in the traction system spread in many areas including power electronics based traction transformers, auxiliary power supply systems, rectification, integration of regenerative braking, reactive power compensation and voltage regulation and traction motor controls. This paper reviews the applications of semiconductor based power electronic devices in electrified railway system and illustrates some major application areas.},
     year = {2020}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Power Electronics Converter Application in Traction Power Supply System
    AU  - Asegid Belay Kebede
    AU  - Getachew Biru Worku
    Y1  - 2020/08/25
    PY  - 2020
    N1  - https://doi.org/10.11648/j.epes.20200904.12
    DO  - 10.11648/j.epes.20200904.12
    T2  - American Journal of Electrical Power and Energy Systems
    JF  - American Journal of Electrical Power and Energy Systems
    JO  - American Journal of Electrical Power and Energy Systems
    SP  - 67
    EP  - 73
    PB  - Science Publishing Group
    SN  - 2326-9200
    UR  - https://doi.org/10.11648/j.epes.20200904.12
    AB  - The electrified railway systems have been spreading all over the world. In big cities, metro or light rail transit railway networks have been constructed extensively. Expansion of this enormous dynamic electric load has been created huge amount of stress on the power grid. Generally, the speed drives, power conversion equipment or frequency converters inject harmonic in to railways power supply system. These harmonics seriously disturbs other electrical systems or generate a high frequency electromagnetic fields in neighboring electrical equipment as well as traction network signaling system. However, new developments in power electronic converter enable efficient and flexible conditioning of electrical energy in the application of railway power system. Power electronics, already previously being a pioneer for progress of traction vehicles, brought forth an ultimate standardization of the traction power supply system. Today, the spectrum of power electronic converters application in the traction system spread in many areas including power electronics based traction transformers, auxiliary power supply systems, rectification, integration of regenerative braking, reactive power compensation and voltage regulation and traction motor controls. This paper reviews the applications of semiconductor based power electronic devices in electrified railway system and illustrates some major application areas.
    VL  - 9
    IS  - 4
    ER  - 

    Copy | Download

Author Information
  • African Railway Ceneter of Excellence, Faculty of Technology, Addis Ababa Institute of Technology, Addis Ababa, Ethiopia

  • Electrical and Computer Engineering, Faculty of Technology, Addis Ababa Institute of Technology, Addis Ababa, Ethiopia

  • Sections